Caple C736GSS Uživatelský manuál stáhnout pdf (Strana 22)

REGULATING THE BURNER MINIMUM SETTING

On gas valves provided with adjustment screw in the centre of the shaft

(figure 27):

< Using a screwdriver with maximum diameter 3 mm, turn the screw inside

the tap until the correct setting is obtained.

On gas valves provided with adjustment screw on the valve body (figure 28):

< Turn the screw “A” to the correct setting with a screwdriver.

< In models with a gas-lighter incorporated into the knobs, turn screw “A” via

the hole in the microswith.

For G30/G31 gas, tighten the adjustable screw completely.

LUBRICATING THE GAS TAPS

If one of the gas taps becomes difficult to turn, dismantle it, thoroughly clean with

petrol and apply special high-temperature grease.

These operations must be performed by a specialised engineer.

Figure 27

Figure 28

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Žádné komentáře

Caple C736GSS Uživatelský manuál Strana 22