Caple CR9215 Technické informace stáhnout pdf (Strana 27)

AR1585

 •RaisethedraughtdivertercovertoexposetheTTBphial

situated on the left side of the flue and remove the trim.

See diagram 13.

 •Removethephialfromthebracketbyslidingthe

capillary tube through the slot and releasing the end out of

the hole. Sea diagram 13.

AR1556

9.4 Working inside the controls compartment:

 • Removethefourscrewsretainingtheelectriccontrols

cover. See diagram 14.

AR1551

 •Removethetwoscrewsretainingthesidecover.See

diagram 15.

AR1588

 • Makesurethephialisverticaltoallowthephialtopass

through the access tube inside the cooker.

9.5 To remove the TTB:

 •Pullthecomponentfrominsidethecontrols

compartment taking care not to damage any electrical

wires.

 •PushthenewTTBphialthroughtheaccesstubeand

place the end first in the hole and then through the slot of

the retaining bracket.

 •Reassembleallothercomponentsinreverseorder.Take

care not to trap any wires or capillary tubes.

NOTE: ONLY ORIGINAL REDFYRE REPLACEMENT PARTS

MAY BE USED.

10. BOOSTING ELEMENT

10.1 The boost oven element is situated in the lower right-hand

oven. To remove the element:

 •Undothetwoscrewsholdingthesupportbracket.See

diagram 16, Arrow A.

AR1560

•Removethesinglefixingscrewholdingtheelementand

carefully pull it forward. See diagram 24, Arrow B.

 •Removethetwowiresandreplacetheelement.

Reassemble in reverse order.

SERVICING INSTRUCTIONS

REPLACING PARTS

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Žádné komentáře

Caple CR9215 Technické informace Strana 27